errordatabase not select



Handling instructions

Store in a cool and dry place.
Prepare balanced stack, size by size, 3 feet equal size, and support at ground level to place the door horizontally.
Cover the doors or stack with plastic sheet.
Do not store or place any other material over the door.
Do not store doors in warm temperature area, as it may cause severe warping on the door.
Fit the door after completing the wet area work and after cleaning the floor at site.
To fix screws and hinges as per thickness and size of the door, consult an architect or hardware expert or call DoorEra.

Apply paint coat on the entire door, edges as well as the surface, to avoid moisture attack and warping.

Installation instructions

Deliver door(s) to building site after plaster or cement is dry. If doors are stored at job site for than one week, all edges should be sealed.
Handel with clean gloves and do not drag doors across one another or across other surfaces.
Store doors flat on a level surface in a dry, well ventilated building. Cover to keep clean, but allow air circulation.
Doors should not be subjected to excessive water, abnormal heat, extreme dryness, humid condition or sudden changes therein. They should be conditioned to average prevailing relative humidity of the locality before hanging.
The utility or structural strength of the door must not be impaired in the fitting of the door, the application of hardware, or cutting and altering the door for lights, louvers, panels, or any other special details.
Solid core doors 6´ and above, require 3 hinges. All doors greater than 7´0½ require 4 hinges. Field trimming of doors will avoid the warranty.
Before finishing, remove handling marks or effects of exposure to moisture through, final sanding over all surfaces of the door using fine grit sandpaper. Clean before applying finish.
Always apply wooden border of 4mm and above on all edges to avoid moisture gain. Doors without border will not be covered under warranty.


When you buy a door, we want you to be completely satisfied. Depending on its application, whether it is an interior door, a front door or an Entry System, DoorEra offers its customers one of the most comprehensive warranties in the industry.